Made in USA
Durable jaws open 1/4" to 1-1/8" to fit most battery terminals
Jaws fit under cable terminal and the center screw pushes down on posts to pull terminal up
Ideal for use on cars, trucks, SUV's, boats, industrial, and farm equipment
Easily remove battery terminal cables and helps prevent damage to battery posts
Made in the USA
Measures the ability of an engine cylinder to hold compressed air using shop air pressure and supplements as a compression tester
Precision regulator with a combination M14 and M18 adapter on a 26" hose assembly
2-1/4" special gauge has one multicolored band for measuring low, moderate and high leakage and a scale range from 0-100%
Test circuits while terminals are still in the connector
Kit contains three sets of two jumper wires for three different sizes (14,16, & 20 Contact Sizes) & 5 terminal tools to remove damaged terminals.
Jumper wires are used to test possibly defective terminals and connectors and to check current flow.
Terminal tools are used to release defective contacts.
Made in USA
The carbide scraper features a shorter and narrower double-dip grip handle
Can be used to clean disc brake caliper slides
The tungsten carbide tip is brazed to the steel blade that is molded into the comfortable 5" long handle
The tip remains very sharp and is precision ground
Made in the USA
Designed for long reach applications and hard to reach spaces
Works well on split rings and springs
High-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention
Made in the USA
Easily relieves tension on single spring brakes for GM® vehicles
Offers an easy way to remove single brake springs, so that brake shoes, emergency brake cables or brake cylinder can be serviced
Hook grabs the spring while the tool point acts as a fulcrum to pry the spring free
Made in the USA with a Lifetime Warranty
Unique oval tips designed specifically for bearing race applications
Full black oxide finish for enhanced corrosion resistance
Includes sizes: 7/16" x 6", 1/2" x 10", 9/16" x 14" and 5/8" x 20"
Heavy duty steel frame
Fingertip locking pawl
Replaceable 360-Degree deep slot swivel tips
9-Inch overall length
Vinyl cushion grips
Made in the USA with a Lifetime Warranty
58 inch OAL
Patented, two-composite, ergonomically designed handle provides a comfortable and secure grip and is oil, solvent, and temperature resistant
Metal striking cap at the end of the handle is in direct contact with the shaft allowing the user to strike the tool without damaging the handle
Black oxide finish for additional rust protection
Made in the USA
Tips are not guaranteed for warranty unless it is a material defect
90° angle serrated jaws with dimples for lock rings with tabs
1-1/2" inch haw opening
Spreads, removes, and installs rings without holes
Made in the USA
Cuts up to 3/0 fine strand copper battery cable (not for use on steel cable)
Precision ground blades minimize deflection
Plastisol grips for added comfort
7-1/2-inch Overall length
Made in the USA
Used to remove 4 flute taps
Used to remove broken machine screw and hand taps, pipe taps, and STI taps
Extractors allow you to remove broken taps without drilling, lasers, damage threads, or scrapping parts.
Hardened steel fingers fit in the flutes of broken taps to back it out.
Assembled in the USA
Designed to aide in repairing Two Valve Ford Modular Cylinders Heads. A quality, foolproof repair system that is cost effective and fast
High quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer
Total labor time as short as 25 mins, For use on 4.6L, 5.4L and 6.8 V-10 Ford Triton Two Valve Engines
For use on years 1996 to 2003, Part No. 389-100 Replacement Inserts
Insert size: m14-1.25, Patented
Ford spark plug insert installer designed to aide in repairing ford modular cylinder heads
Quality, foolproof repair system that is fast, cost effective and simple to use
Made in the USA
Torque Range: 200-600 Foot Pound
Nickel/Chrome finish with ergonomic grip
Tool does not have to be 'turned down' after use, providing convenience
Torque setting locks on adjustable wrenches for repetitive applications
Adjustment knob eliminates spring tension, so setting torque on adjustable wrenches is fast and easy
Made in the USA
CDI Torque is a Snap On Industrial Brand.
Each tool comes with a Certificate of Calibration and custom molded storage case.
The CDI Torque does not have the Snap On Dual 80 ratcheting mechanism; the remainder of the wrench is very similar or identical in form, fit, and function.
Torque Range: 30 - 200 Inch Pound
Handles are lightly knurled for a tough, non-slip grip. Dual scale, calibrated dual direction, Positive lock with spring loaded pull down lock ring
Fast, accurate and easy to set, Easy-to-read laser marked scales, Most feature quick release buttons which provide good socket retention as well as easy socket removal
Accuracy: ± 3% clockwise ± 4% CCW of indicated value, CW, from 20% to 100% of full scale
Made in the USA
Handy tool that compresses valve springs for quicker, easier camshaft, valve seal, valve spring, or retainer service
You don't have to remove the head from the engine first
OEM-approved tool
Used with a 3/8 inch ratchet or breaker bar
Works on 1991-2004 Ford vehicles with 4.6L, two-valve, V8 engines; 4.6 4V, 5.4 V8 and 6.8 V10
Made in the USA
12” OAL with a straight blade for all striking applications
Patented, two-composite, ergonomically designed handle provides a comfortable and secure grip and is oil, solvent, and temperature resistant
Metal striking cap at the end of the handle is in direct contact with the shaft allowing the user to strike the tool without damaging the handle
Black oxide finish for additional rust protection
Made in USA
Quickly removes and installs fan clutch when repairing the water pump or fan clutch.
Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary.
Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually.
Use with an air hammer.
Includes blow molded storage case.
Made in USA
This set includes a piloted drill, spring-loaded tapping tool and 5 magnetic drain plugs
The unique tapping tool ensures the new thread will be perpendicular to the gasket surface to prevent leakage
Works on soft steel and aluminum oil pans with 1/2 inch, 12 mm and 14 mm threads
Can be used on the vehicle when room permits
Made in the USA with a Lifetime Warranty
Used for a multitude of applications, such as removing gaskets, rust, paint, carbon buildup, and floor tile
Blades are ground for a sharp edge and can be resharpened after heavy use to RETURN the cutting edge to its original sharpness
Capped end allows for striking without damaging the handle
The patented, two-composite handle is ergonomically designed, providing superior comfort & grip
Hardened and tempered alloy steel that is black oxide finish for additional rust protection
